Skip to content

AccuBoost Combi 60L With a Pump

60L Pumped Accumulator Vessel

The AccuBoost Combi 60L pumped model has a pressurised vessel water storage capacity of 27.5L. The vessel will supplement the water supplied by the mains providing an additional 2L/min into the system.

Showers

Taps

Combination Boiler

Unvented Cylinder

Where to buy

AccuBoost 60L Pumped Accumulator

Features

A drench shower head running water

Boost water flow

Increase the water flow throughout the home via a combi boiler.

AccuBoost Pumped Image Close up of Pump

Robust brass pump

The AccuBoost pump has been designed with a robust brass end and impeller.

Accuboost zoomed in image of product logo

Quiet

Engineered to be very quiet.

Salamander Pumps 3 Year Warranty

Warranty

3 years warranty.

Compatability

Someone filling up a measuring jug with water using the kitchen tap

AccuBoost Combi 60L accumulator with a pump is suitable for a combi boiler mains fed system.

Toilet

Wash basin

Washing machine

Dishwasher

Instant electric shower

Thermostatic mixer shower

Drench shower head

Multi-function shower head

Body jets

Technical Details

    AccuBoost 60L Pumped
Part Number
ACC-060-SYS
General
Warranty 3 Years
Noise rating
Noise when filling 61.9 dBA
Noise when emptying 60.5 dBA
Specification
Maximum Operating Pressure 8.6 Bar
Operating Temperature Range 4°C to 35°C
Vessel Size 55 Litres
Maximum Water Vessel Water Storage Capacity 27.5 Litres
Dimensions
Height 675mm
Width 457mm
Depth 480mm
Weights
Empty Weight 16kg
Filled Weight 43kg
Maximum Weight 71kg
Pump
Pump Type Regenerative
Pump Model ASSYACCUFORCE
Mechanical Seal PTFE/EPDM Rubber/Aluminium Oxide
Pump body/Impeller Brass
Enclosure Protection IPX4
Motor
Type Capacitor start and run induction motor
Duty Rating Continuous
Electrical
Power Supply/Phase/Frequency 230v/1/50Hz
Current (Full load) 1.4 A
Power Consumption 300w
Fuse Rating 3A
Power Cable Pre-wired with plug
Connections
Pump 3/4" male BSP
Anti-vibration Couplers 3/4" female BSP - 22m push-in
Performance
Maximum Head 3 Bar
Maximum Flow Rate 16 l/min
Time at Maximum Flow Rate 7 Minutes
Minimum Continuous Flow Rate 12 l/min

FAQS

View all
What is a mains fed system?

A mains fed system is one which is fed directly by the mains water such as a combination boiler or an unvented hot water cylinder.

How do I measure my flow rate?

Measuring the water flow is an important step in choosing the right pump. Water flow rate is measured in litres per minute (L/min).

To measure the water flow rate, you will need a measuring jug and a timer.

  1. Hold the measuring jug under the outlet which will be boosted.
  2. Turn the outlet onto fully hot or cold (depending on which is to be boosted).
  3. Measure the water in the jug after 10 seconds, in litres.
  4. Multiply the amount of water by 6 to measure the number of litres per minute.

For example, if you gathered 600ml in 10 seconds, to calculate the flow rate in litres per minute – 600 x 6 = 3600ML per minute = 3.6L/min.

You can also use our interactive flow calculator to work out the flow rate of a single outlet.

Learn how to measure your water flow from the video.

Similar Products

HomeBoost

Intelligent Mains Booster Pump

Homeboost product

Compatability

Showers

Taps

Combination Boiler

Unvented Cylinder

View Product Details

AccuBoost Combi 120L With a Pump

120L Pumped Accumulator Vessel

Accuboost 120L pumped accumulator Salamander Pumps

Compatability

Showers

Taps

Combination Boiler

Unvented Cylinder

View Product Details

AccuBoost Combi 180L With a Pump

180L Pumped Accumulator Vessel

AccuBoost 180L Pumped Accumulator Salamander Pumps

Compatability

Showers

Taps

Combination Boiler

Unvented Cylinder

View Product Details

AccuBoost Unvented 450L With a Pump

450L Pumped Accumulator Vessel

AccuBoost 450l Accumulator Pumped Salamander Pumps

Compatability

Showers

Taps

Combination Boiler

Unvented Cylinder

View Product Details