0191 516 2002

AccuBoost 120L Pumped

AccuBoost will provide a solution in properties where the current mains water supply is unable to meet demand. Ideal for use with combination boilers or unvented systems where there is poor pressure and flow.

Our range of accumulator tanks store water at pressure, when an outlet is opened the water from the tank is released providing additional flow to the mains supply. 

AccuBoost pumped variants will always maintain a flow rate of 12 litres per minute, in addition to the extra flow provided by the tank. 

AccuBoost pumped variants are suitable for properties with a flow rate below 12 litres per minute and/or the static pressure is below 2.0 bar. If the flow rate/static pressure is unknown, select a pumped model.

  • Lightweight, composite material
  • Supplied as one unit ready to install
  • Link multiple tanks together for additional capacity
  • One person lift (ACC-060, ACC-120)
  • 3 year warranty
    ACC-120-SYS
Guarantee   3 Years
Specification Maximum Operating Pressure 8.6 Bar
Operating Temperature Range 4°C to 49 °C
Vessel Size (Litres) 112
Maximum Water Vessel Water Storage Capacity (Litres) 56
Dimensions Height (mm) 1126
Width (mm) 457
Depth (mm) 480
Weights Empty Weight (kg) 20
Filled Weight (kg) 76
Maximum Weight (kg) 132
Pump Pump Type Regenerative
Pump Model ASSYACCUFORCE
Mechanical Seal Nitrile/carbon/ceramic
Pump body/Impeller Brass
Enclosure Protection IPX2
Motor Type Capacitor start and run induction motor
Duty Rating Continuous
Electrical Power Supply/Phase/Frequency 230v/1/50Hz
Current (Full load) 1.9 A
Power Consumption 410w
Fuse Rating 3A
Power Cable Pre-wired with plug
Connections Pump 3/4” male BSP
Anti vibration Couplers 3/4” female BSP - 22m push-in
Performance Maximum Head 4 bar
Maximum Flow Rate 16l/min
Time at Maximum Flow Rate 9 mins
Minimum Continuous Flow Rate 12l/min
  Performance values may be higher if mains natural flow is above 12l/m
Applications
Technology inside
Compare Pumps

Select up to 3 pumps

Compare >