This premium universal twin ended pump will also quietly and efficiently boost the hot and cold water supplies to showers, baths, basins, toilets and whole house appliances in a negative or positive head gravity fed installation.
Formerly known as ESP100 CPV, Salamander Pumps has Right Pump 100 TU pumps available today.
For maintained pressure at higher flow rates, you need one of our Right Pump 3.0 bar shower and whole house pumps. This is due to the fact the centrifugal impeller means these pumps offer an extra boost to your appliances and are quiet with it.
• The most powerful 3.0 pumps in the range.
• The quietest pumps in our range!**
• Crossover technology – allows them to power just hot or cold or both.
• Patented technology.
• AV couplers included.
**Independently tested. Contact us for more information.
*Can be increased to 3 years by calling Pumpwise on the day of installation.
**One of the quietest shower pumps in it's category, 55.5dBA.
This product was formerly known as ESP100 CPV
The RP100 TU pump is a 3.0 bar twin universal centrifugal shower pump suitable for boosting water performance in a gravity fed negative and positive head system.
With cross over technology inside allowing for individual outlet (hot or cold) operation, this pump is the perfect solution for boosting shower or whole house appliances. This pump is suitable for use across a wide range of shower types and heads up to 200mm as well, including Victorian, multi-function and showers with massage function or champagne spray.
AV couplers with isolating valves are included.
All of our Right Pump Universal pumps are protected by the following patent: Low Water Starvation Protection - GB2402444B
|Pressure @ closed head||3.0 bar|
|Pressure @ 8lpm||2.85 bar|
|Pressure @ 16lpm||2.65 bar|
|Maximum water Temperature||60 C|
|Pump connections||3/4" BSP|
|Pressure vessel air pre-charge||20 psi|
|Hose connections (UK model)||3/4" female x 22 mm push-fit x 280 mm long, isolating valves on all hoses|
|Hose connections (ROI model)||3/4" female x 21mm push-fit x 280 mm long, isolating valves on all hoses|
|Motor type||A.C Induction|
|Motor duty rating||Continuously rated|
|Current (full load)||4.4 amps|
|Power consumption||2037 watts|
|Fuse rating||5 Amps|
|Power cable (pre-wired)||1.5 metres|
|Enclosure protection (IP rating)||IPX2|
|Height (Excluding hoses)||317 mm|
|Weight (Excluding hoses)||9.9 kg|
*Can be extended to 3 years by calling Pumpwise on 0191 516 2002 on the day of installation to verify the installation.