For maintained pressure at higher flow rates, you need one of our Right Pump 1.5 bar shower pumps. The centrifugal impeller means these pumps offer an extra boost to your shower/system, and are quiet with it.
Right Pump 50 TU pumps, formerly known as ESP 50 CPV, are available from Salamander Pumps.
This premium twin ended universal pump will quietly and efficiently boost the hot and cold water supplies to showers, bath basins and toilets in a negative or positive head gravity fed installation. This pump is suitable for a wide range of shower types and heads, single mixer taps and will refill your toilet cistern in double quick time too.
• The most powerful 1.5 bar pumps in the range.
• The quietest pumps in the UK!**
• Crossover technology – allows them to power just hot or cold or both.
• Patented technology.
• AV couplers included.
**Independently tested. Contact us for more information.
*Can be increased to 3 years by calling Pumpwise on the day of installation.
**One of the quietest shower pumps in it's category, 45.5dBA.
This product was formerly known as ESP 50 CPV.
The RP50 TU pump is a 1.5 bar twin centrifugal shower pump suitable for boosting water performance in a gravity fed negative or positive head or negative head system.
This pump can be used with conventional and multi-function showers and a shower head up to 100mm. With cross over technology inside allowing for individual outlet (hot or cold) operation, this pump is the perfect solution for boosting shower or bathroom performance. AV couplers with isolating valves are included.
Our entire Right Pump Universal range is protected by the following patent: Low Water Starvation Protection - GB2402444B
|Pressure @ closed head||1.5 bar|
|Pressure @ 8lpm||1.35 bar|
|Pressure @ 16lpm||1.2 bar|
|Maximum water Temperature||60 C|
|Pump connections||3/4" BSP|
|Pressure vessel air pre-charge||8psi|
|Hose connections (UK model)||3/4" female x 22 mm push-fit x 280 mm long, isolating valves on all hoses|
|Hose connections (ROI model)||3/4" female x 21mm push-fit x 280 mm long, isolating valves on all hoses|
|Motor type||A.C Induction|
|Motor duty rating||Continuously rated|
|Current (full load)||1.07 amps|
|Power consumption||323 watts|
|Fuse rating||3 Amps|
|Power cable (pre-wired)||1.5 metres|
|Enclosure protection (IP rating)||IPX2|
|Height (Excluding hoses)||317 mm|
|Weight (Excluding hoses)||5.6 kg|
*Can be extended to 3 years by calling Pumpwise on 0191 516 2002 on the day of installation to verify the installation.