0191 516 2002

RP75PT

For maintained pressure at higher flow rates, you need one of our Right Pump 2.0 bar shower, bathroom and house pumps. The centrifugal impeller means these pumps offer an extra boost to your shower/system, and are quiet with it.

Right Pump 75PT pumps, previously known as RHP75 or RSP75, are available from Salamander Pumps.

This premium twin ended pump will quietly and efficiently boost the hot and cold water supplies to showers, baths, basins and toilets in a positive head, gravity fed installation. This pump is also suitable for a wide range of shower types and heads, single and mixer taps and will refill your toilet cistern in double quick time.

  • The most powerful 2.0 bar pumps in the range
  • Quiet - only 50.2dBA*
  • Crossover technology – allows them to power just hot or cold or both
  • AV couplers included

*Independently tested. Contact Salamander Pumps for more details.


      

Ensure the product you purchase is correct for your region to avoid invalidating the warranty.

This product was formerly known as RHP75 or RSP75.

The RP75PT pump is a 2.0 bar twin centrifugal shower pump suitable for boosting water performance in a gravity fed, positive head system.

This pump can be used with conventional and multi-function showers and a shower head up to 125mm. With Crossover technology inside allowing for individual outlet (hot or cold) operation, this pump is the perfect solution for boosting shower or bathroom performance. AV couplers with isolating valves are included.

Guarantee 3 years
WRAS Approval  1810090
Pump Type Centrifugal
Noise 50.2dBA*
Mechanical Seal Nitrile/Carbon/Ceramic
Anti-vibration feet Yes
Inlet isolators Yes
Flexible Hoses 4
Pressure @ closed head 2.2 bar
Pressure @ 8lpm 2.1 bar
Pressure @ 16lpm 1.9 bar
Maximum water Temperature 65°C
Pump connections 3/4" BSP
Hose connections (UK model) 3/4" female x 22 mm push-fit x 280 mm long, isolating valves on all hoses  
Hose connections (ROI model) 3/4" female x 21mm push-fit x 280 mm long, isolating valves on all hoses
Motor type A.C Induction
Motor duty rating Continuously rated
Power supply 230V
Current (full load) 2.70 amps
Power consumption 630 watts
Fuse rating 5 Amps
Power cable (pre-wired) 1.5 metres
Enclosure protection (IP rating) IPX2
Length 331 mm
Width 148 mm
Height (Excluding hoses) 161 mm
Weight (Excluding hoses) 6.03 kg

 

*Independently tested. Contact Salamander Pumps for more information. 

Applications

Bath
Conventional shower
Taps
Toilet Cistern
Victorian can
Wash basin
Whole house appliances

Technology inside

              

Compare Pumps

Select up to 3 pumps

Compare >