Skip to content

Whether you need to power just one shower or tap or the whole house, there is a product in the Salamander Pumps range to help.

It is important to select the right product for your hot water system. There are three main types of hot water system in the United Kingdom, these systems are shown below.

GravityBooster

Homes with a gravity fed water system often suffer with low water pressure or may want to increase the shower pressure. The pumps in our GravityBooster range provide a solution to this common problem, including products that will increase water pressure to the shower, bathroom, or whole house.

Explore this range

Gravity booster product range

MainsBooster

Low mains water pressure and flow in the home can be overcome by installing a product from our MainsBooster range. We have a variety of solutions for properties, whether a combi boiler is installed or unvented cylinder.

Explore this range

Mainsbooster product range

Accessories

Get the most out your pump with Salamander Pumps' comprehensive range of pump accessories, including S-Flange, Hoses, Fitting Kits, None Return Valves and more.

Explore Accessories

A range of Salamander Pumps product accessories

Customer Support

What Type of Water System Do I Have?

Illustration showing a gravity system

Gravity Fed

These systems rely on gravity to force water around the system, with the height of the cold-water storage tank determining the pressure throughout the system. A shower or whole house pump can be installed to increase the water pressure and flow in a gravity fed system.

Illustration showing a combi mains system

Mains Fed: Combi Boiler

A combination boiler is fed from the cold-water mains. Water is supplied at mains pressure and flow throughout the home. Hot water is delivered on demand with no need for stored water.

Illustration showing an unvented system

Mains Fed: Unvented

In these systems hot water is stored within a cylinder, heated through the use of a boiler, an internal immersion heater or solar thermal process. When hot water is required, it is forced from the cylinder at the pressure of the incoming mains.

Chat Offline: Leave A Message Speech bubbles icon