CombiBoost
CombiBoost boosts the mains water supply to combination boilers up to 10 litres per minute.
It sits directly on the incoming mains water and boosts water flow, making it an ideal solution for properties with low mains supply.
Our range of inline pumps should be installed directly onto the incoming mains using 3/4" BSP to 15mm or 22mm fittings either after the stop tap or before the boiler appliance.
- 1 year warranty
- Boost mains water flow up to 10l/min
- Improved shower performance
- Quicker bath fill
- Stronger flowing taps
- WRAS approved
- Fittings kit available here
Buy Now
Not sure which pump to choose? - Read our guide to choosing the right pump
| CombiBoost | ||
| General | Guarantee | 1 Year |
| Features | Pump Type | MainsBooster |
| Performance | Litres per Min | 10l |
| Bar Rating | 1.0 bar | |
| Motor | Type | Brushless |
| Duty Rating | Continuously rated | |
| Electrical | Flow Indicator Light | No |
| Power Supply | 230v | |
| Current (Full load) | 1.8 Amps | |
| Power Consumption | Variable | |
| Fuse Rating | 3 Amps | |
| Power Cable (pre-wired) | 1.5 metres | |
| Physical | Enclosure Protection (IP Rating) | IPX4 |
| Length | 193mm | |
| Width | 110mm | |
| Height | 175mm | |
| Weight | 3.1kg |
.png)
