Case Studies

A householder with a 350L unvented hot water cylinder had a 300L accumulator with a pump installed to boost water flow in their home. They had already changed two pumps because it kept running dry as the accumulator was undersized therefore they needed an alternative solution.

A householder, DIY influencer Becky Russell, decided to renovate her upstairs bathroom. Unfortunately, the water flow in the bathroom didn’t even reach 4 L/min, therefore she spoke to the Salamander Pumps team for advice on improving water performance.

This new-build property has multiple outlets including a double shower, unfortunately the mains water supply was only 12L/min at 2 Bar, which was not able to provide a sufficient performance of all the outlets so they needed to improve the mains water pressure and flow.

Workers within an office block were struggling with insufficient water flow with only 2 L/min at the kitchen due to poor gravity fed hot water supply. It was taking them a long time to fill a basin for washing dishes and filling the kettle.

After a customer was having a big extension built onto their house, Vapour Heating Ltd was asked to install new boiler with unvented cylinder as well as a 180L Pumped AccuBoost to help boost water flow to the two bathrooms in the property.

The householder of a new build house suffered from poor mains water pressure and flow. The HomeBoost increased water flow up to 12L/min from the bath tap. The performance of the shower also significantly improved.