Skip to content

How to measure static water pressure?

  • Connect AquaScan to the outlet.
  • Ensure that the lever is in the closed position.
  • Allow flow through the unit and then close the isolation valve on the outlet of the unit.
  • Ensure all outlets in the property are closed during test.
  • Take three measurements from the live ‘Pressure’ reading. Calculate the average of the three measurements.
  • Open the isolation valve to allow water to flow and then turn off the outlet.

Note: the pressure should always read “0.0” before removing the unit from the outlet.

View all FAQs

Chat Offline: Leave A Message Speech bubbles icon