Skip to content

My TapBoost has become noisy, what can I do?

In normal operation TapBoost is relatively quiet so if it has become noisy it could be because one of the following:

  • Air in the system – Switch the pump off at the wall and run the water through the outlet for several minutes to clear any trapped air.  Then switch the power back on.
  • A blockage or restriction – Isolate the pump from the water supply, remove the filter washer and check for debris.  Clean the filter or if necessary replace it with the spare filter supplied with the pump.  Reconnect the pump.
  • Vibration against the pipework – if possible, secure the associated pipework.

View all FAQs

Chat Offline: Leave A Message Speech bubbles icon