Where can I install an accumulator?

An AccuBoost accumulator must be installed in a dry location, protected from temperatures below 4°C and greater than 35°C, such as a kitchen cupboard, garage, loft space or outbuilding.

Pumped AccuBoost models should ideally be connected as close to the point of entry for the mains water into the property, usually the same location as the stop-tap. The pump can be installed remotely from the vessel, but the pump must be the first thing in the system and be located within 5 meters of measured 22mm pipework (this can include a maximum of 2m of 15mm pipe) of the stopcock.