TankBoost 5 Bar will boost multiple outlets, across multiple floors, all at the same time, in a mains-fed system.
TankBoost is an all-in-one unit made up of a water storage tank and an integrated submerged pump. Additional cold water storage is boosted by an integral submersible pump to increase both pressure and flow, delivering up to 5.0 Bar and 120L/min.
Compared to the 3.0 bar model, the 5.0 bar pump is better suited for boosting water in taller buildings across multiple floors.
Additional water storage units are available to increase capacity.
Yes, TankBoost is ideal for delivering pressure and the higher flow rates required to unvented systems up to 80 litres per minute. TankBoost can also be used to supply combi-boilers, however, combi-boilers may restrict the flow rate of hot water that can be produced.
No, TankBoost has been designed for cold water only, it can however be used to increase cold water flow rates and pressure to any mains hot water system such as unvented cylinders and combi boilers.
All TankBoost units have a ½” brass male inlet connection and 1” female outlet. It is recommended to have 28mm diameter pipework from the TankBoost so as not to restrict the potential flow rates from the unit. This can then be reduced to 22mm or 15mm pipework closer to the outlets.