CT FORCE 30 TU
The CT Force 30 TU Universal negative head pump is available here at Salamander Pumps. The pump has robust brass ends and brass impellers, with this design ensuring it meets the increased demands for water supply within bathrooms, en-suites and whole house appliances.
This twin ended shower and whole house pump will quietly and efficiently boost the hot and cold water supplies to showers, bath basins and toilets in a negative head gravity fed installation. It’s suitable across a wide range of shower types and heads, single mixer taps and will refill your toilet cistern in double quick time too.
• Brass ends and brass impellers.
• 5-year warranty.
• Very quiet in operation.
• Crossover technology – allows the product to power just hot or cold or both.
• Higher pressure – to cope with multiple outlets.
• Patented technology.
• AV couplers included.
*One of the quietest shower pumps in it's category, 52.5dBA.
Ensure the product you purchase is correct for your region to avoid invalidating the warranty.
The CT Force 30 TU Universal pump is a 3.0 bar twin regenerative shower and whole house pump suitable for boosting water performance in a gravity fed negative or positive head system.
This pump can be used with conventional and multi-function showers and a shower head up to 200mm. It’s also suitable for a selection of shower types and heads, including watercan, conventional spray, multi-function massage - champagne spray and multiple body sprays. AV couplers with isolating valves are included.
Each of our CT Force pumps is protected by the following patent: Integrated volute - GB2465392B
Guarantee | 5 years |
Pump Type | Regenerative |
Noise | 52.5dBA* |
Mechanical Seal | Nitrile/Carbon/Ceramic |
Anti-vibration feet | Yes |
Inlet isolators | Yes |
Flexible Hoses | 4 |
Pressure @ closed head | 3.0 bar |
Pressure @ 8lpm | 2.6 bar |
Pressure @ 16lpm | 2.2 bar |
Maximum water Temperature | 60°C |
Pressure Vessel Air Pre-charge | 32psi |
Pump connections | 3/4" BSP |
Hose connections (UK model) | 3/4" female x 22 mm push-fit x 280 mm long, isolating valves on all hoses |
Hose connections (ROI model) | 3/4" female x 21mm push-fit x 280 mm long, isolating valves on all hoses |
Motor type | A.C Induction |
Motor duty rating | Continuously rated |
Power supply | 230V |
Current (full load) | 2.9 amps |
Power consumption | 690 watts |
Fuse rating | 3 Amps |
Power cable (pre-wired) | 1.5 metres |
Enclosure protection (IP rating) | IPX2 |
Length | 210mm |
Width | 125mm |
Height (Excluding hoses) | 315mm |
Weight (Excluding hoses) | 6.79 kg |
*Independently tested. Contact Salamander Pumps for more information.