Salamander Pumps’ CT80 Bathroom pump has been specifically engineered to meet the increased demands for water supply within bathrooms, en-suites and utility rooms.
This twin impeller bathroom pump will efficiently boost the hot and cold water supplies to showers, baths, basins and toilets in a positive head, gravity fed installation. It is suitable across a wide range of shower types and heads, single and mixer taps, and will refill your toilet cistern in double quick time as well.
- Crossover technology – allows them to power just hot or cold or both
- Higher pressure – to cope with multiple outlets
- Patented technology
- AV couplers included
Ensure the product you purchase is correct for your region to avoid invalidating the warranty.
The CT80 Bathroom pump is a 2.6 bar twin regenerative shower and bathroom pump suitable for boosting water performance in a gravity fed, positive head system.
This pump can be used with conventional and multi-function showers and a shower head up to 200mm. With Crossover technology inside allowing for individual outlet (hot or cold) operation, this pump is the perfect solution for boosting bathroom performance. AV couplers with isolating valves are included.
Each of our CT Bathroom pumps is protected by the following patent: Integrated volute - GB2465392B.
|Pressure @ closed head||2.6 bar|
|Pressure @ 8lpm||2.4 bar|
|Pressure @ 16lpm||1.8 bar|
|Maximum water Temperature||65°C|
|Pump connections||3/4" BSP|
|Hose connections (UK model)||3/4" female x 22mm push-fit x 280 mm long, isolating valves on all hoses|
|Hose connections (ROI model)||3/4" female x 21mm push-fit x 280 mm long, isolating valves on all hoses|
|Motor type||A.C Induction|
|Motor duty rating||Continuously rated|
|Current (full load)||2.24 amps|
|Power consumption||484 watts|
|Fuse rating||3 Amps|
|Power cable (pre-wired)||1.5 metres|
|Enclosure protection (IP rating)||IPX2|
|Height (Excluding hoses)||160mm|
|Weight (Excluding hoses)||5.21 kg|