14th September, 2023 | TapBoost | All
TapBoost Installation – G.D. Mills Plumbing & Heating
System type: Gravity fed system
Installer details: G.D. Mills Plumbing & Heating
Date of install: September 2023
Workers within an office block were struggling with insufficient water flow with only 2 L/min at the kitchen due to poor gravity fed hot water supply. It was taking them a long time to fill a basin for washing dishes and filling the kettle.
TapBoost is a great solution for boosting water flow up to 7-11 L/min to a single tap or outlet. It is suitable for use on both hot or cold supplies in a positive head, gravity fed installation (also suitable for use on a mains-fed system).
“Handy wee units. Made a massive improvement on this job.”
Ryan Mills, G.D. Mills Plumbing & Heating