News - Page 6

When linking TankBoost tanks together, should the tank with the pump or the storage tank have the inlet?

Does the static pressure dropping affect the operation of anything within my plumbing system?

What would happen to the pump if the TankBoost tank ran dry of water?

What if I have poor incoming flow rates, can HomeBoost be used to refill the tank quicker?

What pipework connections does the TankBoost have?

As the system uses a submersible pump how can it be safe to place an electrically operated product in a tank of water?

Are there any limitations on the location of the system or do they have to be fitted after the stop tap?

Can TankBoost be connected to shared communal supplies?

Can TankBoost be fitted on restrictive pipework?

Can you use TankBoost to pump hot water?

What water flow rate can I expect AccuBoost accumulators to deliver from an outlet?

What are the flow rates from each accumulator in an open-ended test?

How can I adjust the flow rate from the accumulator?

In a system with a system pressure greater than 2.0 bar and a mains flow rate less than 12 lpm should a TankBoost or accumulator vessel be installed?

If there is water in my pump, has it been used?