This premium universal twin ended pump will quietly and efficiently boost the hot and cold water supplies to showers, baths, basins, toilets and whole house appliances in a negative or positive head, gravity fed installation.
The RP100TU pump was formerly known as ESP100 CPV.
For maintained pressure at higher flow rates, you need one of our Right Pump 3.0 bar shower, bathroom and whole house pumps. The centrifugal impeller means these pumps offer an extra boost to your appliances and are quiet with it too.
- The most powerful 3.0 pumps in the range
- Quiet - only 55.5dBA*
- Crossover technology – allows them to power just hot or cold or both
- Patented technology
- AV couplers included
*Independently tested. Contact Salamander Pumps for more information.
Ensure the product you purchase is correct for your region to avoid invalidating the warranty. This pump is not suitable for installation in the Republic of Ireland.
This product was formerly known as ESP100 CPV.
The RP100TU pump is a 3.0 bar twin universal centrifugal shower pump suitable for boosting water performance in a gravity fed, negative and positive head system.
With Crossover technology inside allowing for individual outlet (hot or cold) operation, this pump is the perfect solution for boosting shower or whole house appliances. This pump is suitable for use across a wide range of shower types and heads up to 200mm as well, including Victorian, multi-function and showers with massage function or champagne spray. AV couplers with isolating valves are included.
All of our Right Pump Universal pumps are protected by the following patent: Low Water Starvation Protection - GB2402444B.
|Pressure @ closed head||3.0 bar|
|Pressure @ 8lpm||2.85 bar|
|Pressure @ 16lpm||2.65 bar|
|Maximum water Temperature||65°C|
|Pump connections||3/4" BSP|
|Pressure vessel air pre-charge||20 psi|
|Hose connections (UK model)||3/4" female x 22 mm push-fit x 280 mm long, isolating valves on all hoses|
|Hose connections (ROI model)||3/4" female x 21mm push-fit x 280 mm long, isolating valves on all hoses|
|Motor type||A.C Induction|
|Motor duty rating||Continuously rated|
|Current (full load)||4.6 amps|
|Power consumption||1045 watts|
|Fuse rating||5 Amps|
|Power cable (pre-wired)||1.5 metres|
|Enclosure protection (IP rating)||IPX2|
|Height (Excluding hoses)||317 mm|
|Weight (Excluding hoses)||9.91 kg|
*Independently tested. Contact Salamander Pumps for more information