RP55SU
For maintained pressure at higher flow rates, you need one of our Right Pump 1.5 bar shower pumps. The centrifugal impeller means these pumps offer an extra boost to your shower/system, and are quiet with it.
Formerly known as ESP 55 CPV, Salamander Pumps has Right Pump 55SU pumps available today.
This premium single ended pump will quietly and efficiently boost the hot or cold water supplies to a wash basin, bath and kitchen taps in a negative or positive head, gravity fed installation.
- Quiet - only 49.5dBA*
- Patented technology
- AV couplers included
- Continuously rated motor - runs as long as it needs to
*Independently tested. Contact us for more information.
Buy Now
Ensure the product you purchase is correct for your region to avoid invalidating the warranty. This pump is not suitable for installation in the Republic of Ireland.
This product was formerly known as ESP 55 CPV.
The RP55SU pump is a 1.5 bar single centrifugal shower pump suitable for boosting hot or cold water performance in a gravity fed, negative or positive head system. This pump can be used with a variety of applications, including a single wash basin, bath and kitchen taps. It is also suitable for hot water to showers or mixers when the cold is from the mains water. AV couplers with isolating valves are included.
Our full range of Right Pump Universal pumps are protected by the following patent: Low Water Starvation Protection - GB2402444B
| Guarantee | 3 years |
| WRAS Approval | 1810090 |
| Pump Type | Centrifugal |
| Noise | 49.5dBA* |
| Mechanical Seal | Nitrile/Carbon/Ceramic |
| Anti-vibration feet | Yes |
| Inlet isolators | Yes |
| Flexible Hoses | 4 |
| Pressure @ closed head | 1.5 bar |
| Pressure @ 8lpm | 1.4 bar |
| Pressure @ 16lpm | 1.3 bar |
| Maximum water Temperature | 65°C |
| Pump connections | 3/4" BSP |
| Pressure vessel air pre-charge | 8psi |
| Hose connections (UK model) | 3/4" female x 22 mm push-fit x 280 mm long, isolating valves on all hoses |
| Hose connections (ROI model) | 3/4" female x 21mm push-fit x 280 mm long, isolating valves on all hoses |
| Motor type | A.C Induction |
| Motor duty rating | Continuously rated |
| Power supply | 230V |
| Current (full load) | 1.10 amps |
| Power consumption | 245 watts |
| Fuse rating | 3 Amps |
| Power cable (pre-wired) | 1.5 metres |
| Enclosure protection (IP rating) | IPX2 |
| Length | 249 mm |
| Width | 148 mm |
| Height (Excluding hoses) | 317 mm |
| Weight (Excluding hoses) | 6.36kg |
*Independently tested. Contact Salamander Pumps for more information.
