RP80SU
This premium 2.4 bar single ended pump will quietly and efficiently boost the hot or cold water supplies to your shower, wash basin, bath and kitchen taps in a negative head or positive head gravity fed installation.
Once known as ESP80 CPV, Right Pump 80SU pumps are available from Salamander Pumps.
For maintained pressure at higher flow rates, you need one of our Right Pumps . The centrifugal impeller means these pumps offer an extra boost, and are quiet with it.
• The quietest pumps in our range!**
• Patented technology.
• AV couplers included.
**Independently tested. Contact us for more details.
* 
**
*Can be increased to 3 years by calling Pumpwise on the day of installation.
**One of the quietest shower pumps in it's category, 52dBA.
This product was formerly known as ESP80 CPV.
The RP80SU pump is a 2.4 bar single centrifugal shower pump suitable for boosting hot or cold water performance in a gravity fed negative head or positive head system. This pump can be used with a variety of applications, including a single wash basin, bath and kitchen taps. It is also suitable for hot water to showers or mixers when the cold is from the mains water.
AV couplers with isolating valves are included.
Our full Right Pump Universal range is protected by the following patent: Low Water Starvation Protection - GB2402444B
| Guarantee | 2 years* |
| WRAS Approval | TBC |
| Pump Type | Centrifugal |
| Noise | 52dBA** |
| Mechanical Seal | Nitrile/Carbon/Ceramic |
| Anti-vibration feet | Yes |
| Inlet isolators | Yes |
| Flexible Hoses | 4 |
| Pressure @ closed head | 2.4 bar |
| Pressure @ 8lpm | 2.3 bar |
| Pressure @ 16lpm | 2.1 bar |
| Maximum water Temperature | 60°C |
| Pump connections | 3/4" BSP |
| Pressure vessel air pre-charge | 14 psi |
| Hose connections (UK model) | 3/4" female x 22 mm push-fit x 280 mm long, isolating valves on all hoses |
| Hose connections (ROI model) | 3/4" female x 21mm push-fit x 280 mm long, isolating valves on all hoses |
| Motor type | A.C Induction |
| Motor duty rating | Continuously rated |
| Power supply | 230V |
| Current (full load) | 1.75 amps |
| Power consumption | 400 watts |
| Fuse rating | 3 Amps |
| Power cable (pre-wired) | 1.5 metres |
| Enclosure protection (IP rating) | IPX2 |
| Length | 273 mm |
| Width | 148 mm |
| Height (Excluding hoses) | 317 mm |
| Weight (Excluding hoses) | 6.69 kg |
*Can be extended to 3 years by calling Pumpwise on 0191 516 2002 on the day of installation to verify the installation.
**Independently tested. Contact Salamander Pumps for more information.
