RP75TU
For maintained pressure at higher flow rates, you need one of our Right Pump 2.0 bar shower, bathroom and house pumps. The centrifugal impeller means these pumps offer an extra boost to your shower/system, and are quiet with it.
Previously known as ESP75 CPV, find Right Pump 75TU pumps at Salamander Pumps.
This premium twin ended pump will quietly and efficiently boost the hot and cold water supplies to showers, baths, basins and toilets in a negative head or positive head, gravity fed installation. It is also suitable across a wide range of shower types and heads, single and mixer taps, and will refill your toilet cistern in double quick time.
- The most powerful 2.0 bar pumps in the range.
- Quiet - only 50.2dBA*
- Crossover technology – allows them to power just hot or cold or both
- Patented technology
- AV couplers included
*Independently tested. Contact Salamander Pumps for more information.
Buy Now
Ensure the product you purchase is correct for your region to avoid invalidating the warranty. This pump is not suitable for installation in the Republic of Ireland.
This product was formerly known as ESP75 CPV.
The RP75TU pump is a 2.0 bar twin universal centrifugal shower pump suitable for boosting water performance in a gravity fed, negative head or positive head system.
This pump can be used with conventional and multi-function showers and a shower head up to 125mm. With Crossover technology inside allowing for individual outlet (hot or cold) operation, this pump is the perfect solution for boosting shower or bathroom performance. AV couplers with isolating valves are included.
Our entire Right Universal range of pumps are protected by the following patent: Low Water Starvation Protection - GB2402444B.
| Guarantee | 3 years |
| WRAS Approval | 1810090 |
| Pump Type | Centrifugal |
| Noise | 50.2dBA* |
| Mechanical Seal | Nitrile/Carbon/Ceramic |
| Anti-vibration feet | Yes |
| Inlet isolators | Yes |
| Flexible Hoses | 4 |
| Pressure @ closed head | 2.2 bar |
| Pressure @ 8lpm | 2.1 bar |
| Pressure @ 16lpm | 1.9 bar |
| Maximum water Temperature | 65°C |
| Pump connections | 3/4" BSP |
| Pressure vessel air pre-charge | 14 psi |
| Hose connections (UK model) | 3/4" female x 22 mm push-fit x 280 mm long, isolating valves on all hoses |
| Hose connections (ROI model) | 3/4" female x 21mm push-fit x 280 mm long, isolating valves on all hoses |
| Motor type | A.C Induction |
| Motor duty rating | Continuously rated |
| Power supply | 230V |
| Current (full load) | 2.70 amps |
| Power consumption | 630 watts |
| Fuse rating | 5 Amps |
| Power cable (pre-wired) | 1.5 metres |
| Enclosure protection (IP rating) | IPX2 |
| Length | 331 mm |
| Width | 148 mm |
| Height (Excluding hoses) | 317 mm |
| Weight (Excluding hoses) | 6.75 kg |
*Independently tested. Contact Salamander Pumps for more information.
