Case Studies

When John at Cruickshank Plumbing and Heating heard that his customer needed to improve the water at a single tap in their home, he chose the Salamander Pumps’ TapBoost to overcome the problem.

Salamander Pumps were asked to identify a solution to low water pressure and flow at a property with an old mains booster set that wasn’t efficient. Here we hear from the installer who contacted us to resolve the problem.

For this installation we partnered with national plumbing company, Metro Plumb. Metro Plumb have installers located all over the UK who are highly trained in dealing with plumbing emergencies, carrying out plumbing repairs and fixing everything from dripping taps to leaky radiators.

Customer had a low flow rate coming from the cold mains running into the building. The water flow rate was about 4 L/min. After HomeBoost was installed, the homeowner could see a noticeable difference in the flow rate in the property.

The customer was struggling to get a sufficient water flow rate at their taps when they had two taps on at the same time. The water flow was below 6L/min. HomeBoost helped to increase the flow rate in the property up to 12 L/min.

When householder Stuart noticed he had low water flow after fitting a new tap in his kitchen he reached out to the branch which he purchased his tap from. Will from Tap Store then reached out to Salamander Pumps, who had the perfect solution.